iftomm - Some of my papers

1.

What is a UFO?

Journal of Aircraft and Spacecraft Technology 2017 1(2)

Number of pages: 11 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 82 (261,855)

2.

Something About Electron Dimension

American Journal of Applied Sciences, Volume 13, Issue 11, Pages 1272-1276, 2016; DOI: 10.3844/ajassp.2016.1272.1276

Number of pages: 5 Posted: 27 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella, Shuhui Li, Guanying Chen, MirMilad Mirsayar and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Harbin Institute of Technology, University of Alabama, Texas A&M University - Department of Civil Engineering and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 67 (293,889)

3.

Some Basic Reactions in Nuclear Fusion

American Journal of Engineering and Applied Sciences Volume 10, Issue 3, (2017)

Number of pages: 8 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Samuel Kozaitis, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Florida Institute of Technology, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 65 (298,621)

4.

Ecosphere Protection Through Green Energy

American Journal of Applied Sciences, Volume 13, Issue 10, Pages 1027-1032, DOI: 10.3844/ajassp.2016.1027.1032

Number of pages: 6 Posted: 27 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella, Filippo Berto, Shuhui Li and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Harbin Institute of Technology and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 58 (316,322)

5.

Deuteron Dimensions

American Journal of Engineering and Applied Sciences, Volume 10, Issue 3, (2017)

Number of pages: 6 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Samuel Kozaitis, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Florida Institute of Technology, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 57 (319,027)

6.

About Nano Fusion and Dynamic Fusion

American Journal of Applied Sciences 2016, 13 (3)

Number of pages: 6 Posted: 22 Nov 2017

Florian Ion Petrescu and John Kaiser Calautit

Bucharest Polytechnic University - ARoTMM-IFToMM and University of Sheffield - Department fo Mechanical Engineering

Downloads 55 (327,492)

7.

Environmental Protection Through Nuclear Energy

American Journal of Applied Sciences, Volume 13, Issue 9, Pages 941-946, DOI : 10.3844/ajassp.2016.941.946

Number of pages: 6 Posted: 27 Nov 2017

Florian Ion Petrescu, Antonio Apicella, Relly Victoria Petrescu, Samuel Kozaitis, Ronald Bucinell, Raffaella Aversa and Taher Abu-Lebdeh

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Florida Institute of Technology, Union College, Advanced Material Lab - Department of Architecture and Industrial Design and North Carolina Agricultural and Technical State University

Downloads 54 (327,492)

8.

Modern Propulsions for Aerospace-Part II

Journal of Aircraft and Spacecraft Technology, 2017, 1(1)

Number of pages: 9 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 53 (333,372)

9.

Some Proposed Solutions to Achieve Nuclear Fusion

American Journal of Engineering and Applied Sciences Volume 10, Issue 3, (2017)

Number of pages: 6 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Samuel Kozaitis, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Florida Institute of Technology, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 53 (330,436)

10.

History of Aviation - A Short Review

Journal of Aircraft and Spacecraft Technology 2017, 1(1)

Number of pages: 20 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 52 (336,347)

11.

Nano-Diamond Hybrid Materials for Structural Biomedical Application

American Journal of Biochemistry and Biotechnology, Volume 13, Issue 1, Pages 34-41 (2016)

Number of pages: 8 Posted: 28 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 45 (354,562)

12.

Airlander

Journal of Aircraft and Spacecraft Technology 2017, 1(2)

Number of pages: 30 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Samuel Kozaitis, Taher Abu-Lebdeh, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Florida Institute of Technology, North Carolina Agricultural and Technical State University, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 45 (357,820)

13.

Processability of Bulk Metallic Glasses

American Journal of Applied Sciences, Volume 14, Issue 2, Pages 294-301, 2017; DOI: 10.3844/ajassp.2017.294.301

Number of pages: 8 Posted: 21 Nov 2017

Raffaella Aversa, Daniela Parcesepe, Relly Victoria Petrescu, Filippo Berto, Guanying Chen, Florian Ion Petrescu, Francesco Tamburrino and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, University of Alabama, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 44 (357,820)

14.

Home at Airbus

Journal of Aircraft and Spacecraft Technology 2017, 1(2)

Number of pages: 22 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 41 (371,388)

15.

Lockheed Martin - A Short Review

Journal of Aircraft and Spacecraft Technology 2017, 1(1)

Number of pages: 19 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 41 (374,940)

16.

Modern Propulsions for Aerospace-A Review

Journal of Aircraft and Spacecraft Technology 2017, 1(1)

Number of pages: 8 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 41 (371,388)

17.

Some Special Aircraft

Journal of Aircraft and Spacecraft Technology 2017, 1(3)

Number of pages: 18 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 40 (371,388)

18.

The Basic Elements of Life's

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4, Pages 1189-1197, DOI : 10.3844/ajeassp.2016.1189.1197

Number of pages: 9 Posted: 22 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 40 (371,388)

19.

Something About the Balancing of Thermal Motors

American Journal of Engineering and Applied Sciences, Volume 10, Issue 1, Pages 200-217, 2017; DOI: 10.3844/ajeassp.2017.200.217

Number of pages: 18 Posted: 21 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Guanying Chen, Shuhui Li, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, University of Alabama, Harbin Institute of Technology, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 40 (371,388)

20.

When Boeing is Dreaming – A Review

Journal of Aircraft and Spacecraft Technology 2017, 1(3)

Number of pages: 13 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 39 (378,417)

21.

About the Light Dimensions

American Journal of Applied Sciences 2016, 13(3)

Number of pages: 5 Posted: 22 Nov 2017

Florian Ion Petrescu and John Kaiser Calautit

Bucharest Polytechnic University - ARoTMM-IFToMM and University of Sheffield - Department fo Mechanical Engineering

Downloads 39 (374,940)

22.

Something About the Mechanical Moment of Inertia

American Journal of Applied Sciences, Volume 13, Issue 11 (2016)

Number of pages: 6 Posted: 27 Nov 2017

Florian Ion Petrescu, Antonio Apicella, Raffaella Aversa, Relly Victoria Petrescu, John Kaiser Calautit, MirMilad Mirsayar and Aniello Riccio

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, University of Sheffield - Department fo Mechanical Engineering, Texas A&M University - Department of Civil Engineering and Second University of Naples

Downloads 38 (378,417)

23.

Our Universe

Journal of Aircraft and Spacecraft Technology 2017, 1(2)

Number of pages: 11 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 38 (378,417)

24.

Gears-Part II

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 473-483, 2017; DOI: 10.3844/ajeassp.2017.473.483

Number of pages: 11 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 38 (378,417)

25.

Transportation Engineering

American Journal of Engineering and Applied Sciences Volume 10, Issue 3, (2017)

Number of pages: 18 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 38 (378,417)

26.

About the Gear Efficiency to a Simple Planetary Train

American Journal of Applied Sciences, Volume 13, Issue 12 (2016)

Number of pages: 9 Posted: 27 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella, MirMilad Mirsayar and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Texas A&M University - Department of Civil Engineering and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 37 (382,075)

27.

Forces of a 3R Robot

Journal of Mechatronics and Robotics, Vol 1, Issue 1

Number of pages: 14 Posted: 13 Dec 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 34 (393,541)

28.

Glassy Amorphous Metal Injection Molded Induced Morphological Defects

American Journal of Applied Sciences, Volume 13, Issue 12 (2016)

Number of pages: 7 Posted: 27 Nov 2017

Raffaella Aversa, Daniela Parcesepe, Relly Victoria Petrescu, Guanying Chen, Florian Ion Petrescu, Francesco Tamburrino and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, University of Alabama, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 34 (393,541)

29.

About Helicopters

Journal of Aircraft and Spacecraft Technology, Volume 1, Issue 3, Pages 204-223, DOI: 10.3844/jastsp.2017.204.223

Number of pages: 20 Posted: 29 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 32 (405,600)

30.

Biomechanically Inspired Shape Memory Effect Machines Driven by Muscle Like Acting Niti Alloys

American Journal of Applied Sciences, Volume 13, Issue 11, Pages 1264-1271, DOI : 10.3844/ajassp.2016.1264.1271

Number of pages: 8 Posted: 27 Nov 2017

Raffaella Aversa, Francesco Tamburrino, Relly Victoria Petrescu, Florian Ion Petrescu, Mateus Artur, Guanying Chen and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM, Polytechnic Institute of Leiria - Centre for Rapid and Sustainable Product Development (CDRSP), University of Alabama and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 32 (401,534)

31.

From Structural Colors to Super-Hydrophobicity and Achromatic Transparent Protective Coatings: Ion Plating Plasma Assisted TiO₂ and SiO₂ Nano-Film Deposition

Number of pages: 9 Posted: 22 Nov 2017

Raffaella Aversa, Valeria Perrotta, Relly Victoria Petrescu, Misiano Carlo, Florian Ion Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab, Bucharest Polytechnic University - ARoTMM-IFToMM, Romana Film, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 32 (401,534)

32.

Physiologic Human Fluids and Swelling Behavior of Hydrophilic Biocompatible Hybrid Ceramo-Polymeric Materials

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4, Pages 962-972, DOI : 10.3844/ajeassp.2016.962.972

Number of pages: 11 Posted: 22 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 32 (401,534)

33.

Mitochondria Are Naturally Micro Robots - A Review

American Journal of Engineering and Applied Sciences, 2016 9(4)

Number of pages: 12 Posted: 22 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 31 (405,600)

34.

The Quality of Transport and Environmental Protection, Part I

American Journal of Engineering and Applied Sciences, Volume 10, Issue 3, Pages 738-755, 2017; DOI: 10.3844/ajeassp.2017.738.755

Number of pages: 18 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Samuel Kozaitis, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Florida Institute of Technology, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 31 (405,600)

35.

Under Water

OnLine Journal of Biological Sciences, Volume 17, Issue 2, Pages 70-87 (2017)

Number of pages: 18 Posted: 28 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 30 (409,913)

36.

Forces at Internal Combustion Engines

American Journal of Engineering and Applied Sciences Volume 10, Issue 2, 2017

Number of pages: 12 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, John Kaiser Calautit, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, University of Sheffield - Department fo Mechanical Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 30 (409,913)

37.

Hybrid Ceramo-Polymeric Nanocomposite for Biomimetic Scaffolds Design and Preparation

American Journal of Engineering and Applied Sciences, 2016, 9(4)

Number of pages: 10 Posted: 22 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Roberto Sorrentino, Florian Ion Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 29 (414,323)

38.

Future Medicine Services Robotics

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4, Pages 1062-1087, DOI: 10.3844/ajeassp.2016.1062.1087

Number of pages: 26 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 29 (414,323)

39.

Inverse Kinematics at the Anthropomorphic Robots, by a Trigonometric Method

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 394-411, 2017; DOI: 10.3844/ajeassp.2017.394.411

Number of pages: 18 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 29 (414,323)

40.

Direct Geometry and Cinematic to the MP-3R Systems

Journal of Mechatronics and Robotics, Vol. 1, Issue 1

Number of pages: 9 Posted: 13 Dec 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 27 (423,476)

41.

Kinematics and Forces to a New Model Forging Manipulator

American Journal of Applied Sciences, Volume 14, Issue 1, Pages 60-80, 2017; DOI: 10.3844/ajassp.2017.60.80

Number of pages: 21 Posted: 21 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Guanying Chen, Shuhui Li, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, University of Alabama, Harbin Institute of Technology, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 27 (423,476)

42.

About Northrop Grumman

Journal of Aircraft and Spacecraft Technology 2017, 1(3)

Number of pages: 24 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 26 (428,332)

43.

Gears-Part I

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 457-472, 2017; DOI: 10.3844/ajeassp.2017.457.472

Number of pages: 16 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 26 (428,332)

44.

Machine Motion Equations at the Internal Combustion Heat Engines

American Journal of Engineering and Applied Sciences 2015, 8 (1): 127.137

Number of pages: 11 Posted: 28 Nov 2017

Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 25 (433,233)

45.

Smart-Factory: Optimization and Process Control of Composite Centrifuged Pipes

American Journal of Applied Sciences, Volume 13, Issue 11, Pages 1330-1341, DOI :10.3844/ajassp.2016.1330.1341

Number of pages: 12 Posted: 27 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Florian Ion Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 25 (438,312)

46.

Biomimetic and Evolutionary Design Driven Innovation in Sustainable Products Development

American Journal of Engineering and Applied Sciences 2016, 9(4)

Number of pages: 10 Posted: 22 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Florian Ion Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 24 (438,312)

47.

Periodontal Bone Substitutes Application Techniques and Cost Evaluation: A Review

American Journal of Engineering and Applied Sciences, 2016, 9 (4): 951.961

Number of pages: 11 Posted: 01 Dec 2017

Jamaluddin Syed, Najmus Sahar, Raffaella Aversa, Relly Victoria Petrescu, Davide Apicella, Erum Khan, Michele Simeone, Florian Ion Petrescu and Antonio Apicella

King Abdulaziz University - Advanced Technology Dental Research Laboratory, Pakistan Institute of Learning and Living (PILL), Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, University of Naples Federico II, Dental and Medical College - Department of Dental Biomaterials and Restorative Dentistry, University of Naples Federico II, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 23 (443,461)

48.

Biofidel FEA Modeling of Customized Hybrid Biological Hip Joint Design Part II: Flexible Stem Trabecular Prostheses

American Journal of Biochemistry and Biotechnology, Volume 12, Issue 4, Pages 277-285 (2016)

Number of pages: 9 Posted: 28 Nov 2017

Raffaella Aversa, Florian Ion Petrescu, Relly Victoria Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 23 (443,461)

49.

Biofidel FEA Modeling of Customized Hybrid Biological Hip Joint Prostheses, Part I: Biomechanical Behavior of Implanted Femur

American Journal of Biochemistry and Biotechnology, Volume 12, Issue 4, Pages 270-276 (2016)

Number of pages: 7 Posted: 28 Nov 2017

Raffaella Aversa, Florian Ion Petrescu, Relly Victoria Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 23 (443,461)

50.

Anthropomorphic Solid Structures n-R Kinematics

American Journal of Engineering and Applied Sciences, Volume 10, Issue 1, Pages 279-291, 2017; DOI: 10.3844/ajeassp.2017.279.291

Number of pages: 13 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 23 (443,461)

51.

Velocities and Accelerations at the 3R Mechatronic Systems

American Journal of Engineering and Applied Sciences, Volume 10, Issue 1, Pages 252-263, 2017; DOI: 10.3844/ajeassp.2017.252.263

Number of pages: 12 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 23 (443,461)

52.

Influence of Curing Light Type and Staining Medium on the Discoloring Stability of Dental Restorative Composite

American Journal of Biochemistry and Biotechnology, Volume 13, Issue 1, Pages 42-50, 2017; DOI: 10.3844/ajbbsp.2017.42.50

Number of pages: 9 Posted: 01 Dec 2017

Ayman Al. Dharrab, Muhammad S. Zafa, Erum Khan, Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

King Abdulaziz University - Advanced Technology Dental Research Laboratory, Taibah University, Dental and Medical College - Department of Dental Biomaterials and Restorative Dentistry, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 22 (448,594)

53.

Biomimetic Finite Element Analysis Bone Modeling for Customized Hybrid Biological Prostheses Development

American Journal of Applied Sciences, Volume 13, Issue 11, Pages 1060-1067, 2016; DOI: 10.3844/ajassp.2016.1060.1067

Number of pages: 8 Posted: 27 Nov 2017

Raffaella Aversa, Florian Ion Petrescu, Relly Victoria Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 22 (448,594)

54.

Cam-Gears Forces, Velocities, Powers and Efficiency

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 491-505, 2017; DOI: 10.3844/ajeassp.2017.491.505

Number of pages: 15 Posted: 21 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 22 (448,594)

55.

Flexible Stem Trabecular Prostheses

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4 (2016)

Number of pages: 9 Posted: 27 Nov 2017

Raffaella Aversa, Florian Ion Petrescu, Relly Victoria Petrescu and Antonio Apicella

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 21 (453,862)

56.

Improving Medical Imaging and Blood Flow Measurement by Using a New Doppler Effect Relationship

American Journal of Engineering and Applied Sciences 2015, 8 (4): 582- 588

Number of pages: 7 Posted: 28 Nov 2017

Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 20 (459,135)

57.

About Bell Helicopter FCX-001 Concept Aircraft - A Short Review

Journal of Aircraft Technology 2017, 1(2)

Number of pages: 6 Posted: 22 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 20 (464,439)

58.

Dynamics of Mechanisms with Cams Illustrated in the Classical Distribution

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 551-567, 2017; DOI: 10.3844/ajeassp.2017.551.567

Number of pages: 17 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Samuel Kozaitis, Taher Abu-Lebdeh, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Florida Institute of Technology, North Carolina Agricultural and Technical State University, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 20 (459,135)

59.

Yield at Thermal Engines Internal Combustion

American Journal of Engineering and Applied Sciences, Volume 10, Issue 1, Pages 243-251, 2017; DOI: 10.3844/ajeassp.2017.243.251

Number of pages: 9 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, John Kaiser Calautit, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, University of Sheffield - Department fo Mechanical Engineering, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 19 (464,439)

60.

Green Energy to Protecting the Environment (Energia Verde Para Proteger O Meio Ambiente)

GEINTEC Journal, Vol. 7, nr. 1, March 2017; DOI/10.7198/geintec.v7i1.971

Number of pages: 22 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 18 (469,646)

61.

Geometrical Synthesis of the Distribution Mechanisms

American Journal of Engineering and Applied Sciences 2015, 8 (1): 63.81

Number of pages: 19 Posted: 28 Nov 2017

Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 17 (474,947)

62.

Testing by Non-Destructive Control

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 568-583, 2017; DOI: 10.3844/ajeassp.2017.568.583

Number of pages: 16 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Ronald Bucinell, Juan Corchado, Filippo Berto, MirMilad Mirsayar, Samuel Kozaitis, Taher Abu-Lebdeh, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Union College, University of Salamanca, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Texas A&M University - Department of Civil Engineering, Florida Institute of Technology, North Carolina Agricultural and Technical State University, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 17 (474,947)

63.

One Can Slow Down the Aging Through Antioxidants

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4 (2016)

Number of pages: 15 Posted: 27 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 16 (480,042)

64.

We are Addicted to Vitamins C and E-A Review

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4, Pages 1003-1018, DOI: 10.3844/ajeassp.2016.1003.1018

Number of pages: 16 Posted: 22 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 16 (480,042)

65.

A Review of the Fatigue Strength of Load Carrying Shear Welded Joints

American Journal of Engineering and Applied Sciences, Vol. 10, Issue 1, 2017; DOI: 10.3844/ajeassp.2017.1.12

Number of pages: 12 Posted: 21 Nov 2017

Filippo Berto, Abedin Gagani, Relly Victoria Petrescu and Florian Ion Petrescu

Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 16 (480,042)

66.

A Dynamic Model for Gears

Number of pages: 7 Posted: 21 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 16 (480,042)

67.

About Homeopathy or ≪Similia Similibus Curentur≫

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4 (2016)

Number of pages: 9 Posted: 27 Nov 2017

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 15 (485,323)

68.

Electron Dimensions

American Journal of Engineering and Applied Sciences, Volume 10, Issue 2, Pages 584-602, 2017; DOI: 10.3844/ajeassp.2017.584.602

Number of pages: 19 Posted: 21 Nov 2017

Relly Victoria Petrescu, Raffaella Aversa, Shuhui Li, MirMilad Mirsayar, Ronald Bucinell, Samuel Kozaitis, Taher Abu-Lebdeh, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Harbin Institute of Technology, Texas A&M University - Department of Civil Engineering, Union College, Florida Institute of Technology, North Carolina Agricultural and Technical State University, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 15 (485,323)

69.

Present a Mechatronic System Having Able to Determine the Concentration of Carotenoids

American Journal of Engineering and Applied Sciences, Volume 9, Issue 4, Pages 1106-1111, DOI: 10.3844/ajeassp.2016.1106.1111

Number of pages: 6 Posted: 22 Nov 2017

Raffaella Aversa, Eleni Mimi Buzea, Relly Victoria Petrescu, Antonio Apicella, Marin Neacsa and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 13 (495,723)

70.

New Aircraft

The 3rd International Conference on Computational Mechanics and Virtual Engineering COMEC 2009 29 – 30 OCTOBER 2009, Brasov, Romania

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 12 (506,137)

71.

Dynamic Cinematic to a Structure 2R

GEINTEC Journal, Vol. 6, issue 2, June 2016; DOI/10.7198/geintec.v6i2.371

Number of pages: 12 Posted: 21 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 12 (501,019)

72.

Otto Motor Dynamics

GEINTEC, ISSN: 2237-0722, Vol. 6, issue 3, September 2016, DOI: 10.7198/geintec.v6i3.373

Number of pages: 15 Posted: 21 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 10 (511,250)

73.

Parallel Moving Mechanical Systems Kinematics

ENGEVISTA, V. 18, N. 2, p. 455-491, Dezembro 2016

Number of pages: 37 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 9 (516,311)

74.

Nano Energy

ENGEVISTA, V. 19, N.2 , p. 267-292, Maio 2017

Number of pages: 26 Posted: 27 Nov 2017

Relly Victoria Petrescu, Florian Ion Petrescu, Raffaella Aversa and Antonio Apicella

Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design and Advanced Material Lab - Department of Architecture and Industrial Design

Downloads 9 (516,311)

75.

Some Mechanical Design Elements

The 3rd International Conference on Computational Mechanics and Virtual Engineering COMEC 2009 29 – 30 OCTOBER 2009, Brasov, Romania

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu, Barbu Grecu, Adriana Comanescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Polytechnic University of Bucharest - GDGI Departments, Polytechnic University of Bucharest - GDGI Departments and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 8 (521,265)

76.

Geared Transmissions Design

International Conference on Engineering Graphics and Design 12-13 June 2009

Number of pages: 4 Posted: 28 Nov 2017

Relly Victoria Petrescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 7 (526,056)

77.

An Original Internal Combustion Engine

The Ninth IFTOMM International Symposium on Theory of Machines and Mechanisms, 2005

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 7 (526,056)

78.

Cinematics of the 3R Dyad

Engevista, Vol. 15(2), p. 118-124, August 2013

Number of pages: 7 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 7 (526,056)

79.

Kinetostatic of the 3R Dyad

ENGEVISTA, V. 16, n. 3, p. 314-321, Setembro 2014

Number of pages: 8 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 7 (526,056)

80.

Gear Design

ENGEVISTA, V. 16, N. 4, p. 313-328, Dezembro 2014

Number of pages: 16 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 7 (526,056)

81.

About the Anthropomorphic Robots

ENGEVISTA, V. 17, N. 1, p. 1-15, Março 2015

Number of pages: 15 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 7 (526,056)

82.

Otto Engines Design

International Conference on Engineering Graphics and Design 12-13 June 2009

Number of pages: 4 Posted: 28 Nov 2017

Relly Victoria Petrescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

83.

Presenting a 'Dynamic Original Model' Used to Study Toothed Gearing with Parallel Axes

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

84.

Dynamics of Cam Gears Illustrated at the Classic Distribution Mechanism

Al III-lea Seminar National de Mecanisme, Craiova, 2008

Number of pages: 12 Posted: 28 Nov 2017

Relly Victoria Petrescu, Adriana Comanescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Polytechnic University of Bucharest - GDGI Departments and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

85.

Determining the Dynamic Efficiency of Gears

The Ninth IFTOMM International Symposium on Theory of Machines and Mechanisms, 2005

Number of pages: 6 Posted: 28 Nov 2017

Relly Victoria Petrescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

86.

V Engine Design

Number of pages: 4 Posted: 28 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

87.

Determining the Mechanical Efficiency of Otto Engine’s Mechanism

Number of pages: 6 Posted: 28 Nov 2017

Relly Victoria Petrescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

88.

Direct and Inverse Kinematics to the Anthropomorphic Robots

ENGEVISTA, V. 18, N. 1, p. 109-124, Julho 2016

Number of pages: 16 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

89.

Kinematics of the Planar Quadrilateral Mechanism

ENGEVISTA, VOL. 14, No. 3., p. 345-348, Dezembro 2012

Number of pages: 4 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

90.

Velocities and Accelerations at the 3r Robots

ENGEVISTA, Vol. 19, No. 1 , p. 202-216, Janeiro 2017.

Number of pages: 15 Posted: 27 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 6 (530,791)

91.

Cam Gear Design

International Conference on Engineering Graphics and Design 12-13 June 2009

Number of pages: 6 Posted: 28 Nov 2017

Narcisa Popescu, Relly Victoria Petrescu and Florian Ion Petrescu

University Politehnica of Bucharest - Department of Descriptive Geometry and Engineering Graphics, Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

92.

MF1 Design

International Conference on Engineering Graphics and Design 12-13 June 2009

Number of pages: 4 Posted: 28 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

93.

The Dynamics of Cam Gears at the Module B (with Translated Follower with Roll)

Al III-lea Seminar National de Mecanisme, Craiova, 2008

Number of pages: 10 Posted: 28 Nov 2017

Relly Victoria Petrescu, Adriana Comanescu, Florian Ion Petrescu and Ovidiu Antonescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Polytechnic University of Bucharest - GDGI Departments, Bucharest Polytechnic University - ARoTMM-IFToMM and Independent

Downloads 5 (535,443)

94.

Geared Transmissions Dynamic Synthesis

Academica - Greifswald, 2008 New Trends in Mechanisms

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu, Barbu Grecu, Adriana Comanescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Polytechnic University of Bucharest - GDGI Departments, Polytechnic University of Bucharest - GDGI Departments and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

95.

Determining the Efficiency of Geared Transmissions

Number of pages: 4 Posted: 28 Nov 2017

Florian Ion Petrescu, Barbu Grecu, Adriana Comanescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Polytechnic University of Bucharest - GDGI Departments, Polytechnic University of Bucharest - GDGI Departments and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

96.

Contributions at the Dynamic of Cams

The Ninth IFTOMM International Symposium on Theory of Machines and Mechanisms, 2005

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

97.

Gear’s Design for the Mechanism’s Highest Efficiency

Number of pages: 4 Posted: 28 Nov 2017

Relly Victoria Petrescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

98.

The Cam Design for a Better Efficiency

Number of pages: 4 Posted: 28 Nov 2017

Florian Ion Petrescu and Relly Victoria Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

99.

The Gear Synthesis with the Best Efficiency

ESFA 2003, R 10

Number of pages: 8 Posted: 28 Nov 2017

Relly Victoria Petrescu and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 5 (535,443)

100.

The Cam Synthesis with Maximal Efficiency

PRASIC, Vol. I - Mechanisms + iTribology 7-8 November 2002

Number of pages: 6 Posted: 28 Nov 2017

Florian Ion Petrescu, Relly Victoria Petrescu and Constantin Ocnarescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and Independent

Downloads 5 (535,443)

101.

Determining Gear Efficiency

Gear Solutions, 2007

Number of pages: 9 Posted: 28 Nov 2017

Relly Victoria Petrescu, Florian Ion Petrescu and Narcisa Popescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Bucharest Polytechnic University - ARoTMM-IFToMM and University Politehnica of Bucharest - Department of Descriptive Geometry and Engineering Graphics

Downloads 5 (535,443)

102.

Determining the Dynamic Efficiency of Cams

Downloads 4 (540,240)

2

103.

Triton for Nuclear Fusion

Number of pages: 9

Raffaella Aversa, Relly Victoria Petrescu, Antonio Apicella, Samuel Kozaitis, MirMilad Mirsayar, Taher Abu-Lebdeh, Filippo Berto, Bilal Akash and Florian Ion Petrescu

Advanced Material Lab - Department of Architecture and Industrial Design, Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Florida Institute of Technology, Texas A&M University - Department of Civil Engineering, North Carolina Agricultural and Technical State University, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, American University of Ras Al Khaimah - Graduate Studies and Research and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 2

104.

Management of Renewable Energies and Environmental Protection

Number of pages: 30

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella, MirMilad Mirsayar, Samuel Kozaitis, Taher Abu-Lebdeh and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Texas A&M University - Department of Civil Engineering, Florida Institute of Technology, North Carolina Agricultural and Technical State University and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

105.

George (Gogu) Constantinescu

Number of pages: 15

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella, MirMilad Mirsayar, Samuel Kozaitis, Taher Abu-Lebdeh and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, Texas A&M University - Department of Civil Engineering, Florida Institute of Technology, North Carolina Agricultural and Technical State University and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

106.

Sustainable Energy for Aerospace Vessels

Number of pages: 7

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

107.

Unmanned Helicopters

Number of pages: 8

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

108.

A First-Class Ticket to the Planet Mars, Please

Number of pages: 10

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

109.

Project Harp

Number of pages: 9

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

110.

Presentation of Romanian Engineers Who Contributed to the Development of Global Aeronautics – Part I

Number of pages: 14

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

111.

The Modern Flight

Number of pages: 10

Relly Victoria Petrescu, Raffaella Aversa, Bilal Akash, Filippo Berto, Antonio Apicella and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, American University of Ras Al Khaimah - Graduate Studies and Research, Norwegian University of Science and Technology (NTNU) - Department of Engineering Design and Materials, Advanced Material Lab - Department of Architecture and Industrial Design and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1

112.

Nikola Tesla

Number of pages: 10

Relly Victoria Petrescu, Raffaella Aversa, Antonio Apicella, Taher Abu-Lebdeh and Florian Ion Petrescu

Bucharest Polytechnic University - ARoTMM-IFToMM, Advanced Material Lab - Department of Architecture and Industrial Design, Advanced Material Lab - Department of Architecture and Industrial Design, North Carolina Agricultural and Technical State University and Bucharest Polytechnic University - ARoTMM-IFToMM

Downloads 1